User Tools

Site Tools


zeus_expansion_interface

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

zeus_expansion_interface [2014/07/03 21:06]
akhe
zeus_expansion_interface [2018/02/08 17:14]
Line 1: Line 1:
-====== Zeus expansion interface ====== 
  
-The Zeus board have a 2 x 12 expansion pin header with 2.54 mm between the pins. This expansion connector is also available on the CAN4VSCP **Odessa** module and will be available on other modules also in the future. 
- 
-For power the board supply Vin (9V-28V) and +3.3V and ground. All boards using it should use 3.3V logic signals. It has a SPI or I2C interface, TTL level serial interface, Five analog channels, five I/O lines, Reset and two interrupt inputs. ​ 
- 
-^ Pin ^ Description ^ 
-| 1 | Ground | 
-| 2 | Ground | 
-| 3 | TX, Serial output from processor. | 
-| 4 | RX, Serial input to processor. | 
-| 5 | SCK - SPI or I2C clock | 
-| 6 | MISO - SPI data in to processor. | 
-| 7 | MOSI - SPI data our from processor. | 
-| 8 | AN0 - Analog input 0 | 
-| 9 | AN1 - Analog input 1 | 
-| 10 | AN2 - Analog input 2 | 
-| 11 | AN3 - Analog input 3 | 
-| 12 | AN4 - Analog input 4 | 
-| 13 | I/O 0 - Input/​Output 0 | 
-| 14 | RESET | 
-| 15 | I/O 2 - Input/​Output 2 | 
-| 16 | I/O 1 - Input/​Output 1 | 
-| 17 | INT1 - Interrupt 1 (low flank) | 
-| 18 | INT0 - Interrupt 0 (low flank) | 
-| 19 | I/O 4 - Input/​Output 4 | 
-| 20 | I/O 3 - Input/​Output 3 | 
-| 21 | Vin - +9V - +28V | 
-| 22 | Vin - +9V - +28V | 
-| 23 | +3.3V | 
-| 24 | +3.3V | 
zeus_expansion_interface.txt ยท Last modified: 2018/02/08 17:14 (external edit)