User Tools

Site Tools


raspberry_pi_din_rail_mounting_instructions

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

raspberry_pi_din_rail_mounting_instructions [2016/10/17 11:51]
akhe
raspberry_pi_din_rail_mounting_instructions [2018/02/08 17:14]
Line 1: Line 1:
-====== Raspberry Pi DIN rail mounting instructions ====== 
  
-This is mounting instruction for the [[http://​www.frogshop.se/​index.php?​route=product/​product&​path=62_71&​product_id=114|Raspberry Pi DIN rail mount kit]]  
- 
- 
-{{:​pidinmount:​din-mount2_800.png|}} 
- 
-The kit 
- 
- 
-{{:​pidinmount:​mount0_800.png|}} 
- 
-Peel of the protective film from the acrylic plate. 
- 
-{{:​pidinmount:​mount1.png|}} 
- 
-Mount the acrylic plate on the DIN clip with the M4 screws. 
- 
-{{:​pidinmount:​mount2.png|}} 
- 
-{{:​pidinmount:​mount3.png|}} 
- 
-{{:​pidinmount:​mount4.png|}} 
- 
-Mount the four spacers and fasten them in the acrylic plate with the four nuts. Remember to select the correct holes. There are holes for vertical and horizontal mounting of the Raspberry Pi card. 
- 
-{{:​pidinmount:​mount5.png|}} 
- 
-Fasten the Rasperry Pi board with the four M2.5 screws. 
- 
-{{:​pidinmount:​mount6.png|}} 
- 
-{{:​pidinmount:​mount7.png|}} 
- 
-{{:​pidinmount:​mount8.png|}} 
- 
-Done! 
- 
-{{:​pidinmount:​mount9.png|}} 
- 
-Horizontal mounting. 
- 
-{{:​pidinmount:​mount10.png|}} 
- 
-{{:​pidinmount:​mount11.png|}} 
- 
-Raspberry Pi with some friends form the VSCP CAN4VSCP family. 
- 
-{{:​pidinmount:​mount12.png|}} 
- 
-{{:​pidinmount:​mount13.png|}} 
- 
-{{:​pidinmount:​mount14.png|}} 
raspberry_pi_din_rail_mounting_instructions.txt ยท Last modified: 2018/02/08 17:14 (external edit)