User Tools

Site Tools


Raspberry Pi DIN rail mounting instructions

This is mounting instruction for the Raspberry Pi DIN rail mount kit

The kit

Peel of the protective film from the acrylic plate.

Mount the acrylic plate on the DIN clip with the M4 screws.

Mount the four spacers and fasten them in the acrylic plate with the four nuts. Remember to select the correct holes. There are holes for vertical and horizontal mounting of the Raspberry Pi card.

Fasten the Rasperry Pi board with the four M2.5 screws.


Horizontal mounting.

Raspberry Pi with some friends form the VSCP CAN4VSCP family.

raspberry_pi_din_rail_mounting_instructions.txt · Last modified: 2018/02/08 17:14 (external edit)