Events
Here the events sent by the module is described.
| Event | Description |
|---|---|
| CLASS1.INFORMATION (20) Type=3, On | An I/O channel has been set to its ON position. For an output this means that it has been set high. For a channel set as an input it means the channel input turned high. The channel is checked every second for a change. |
| CLASS1.INFORMATION (20) Type=4, Off | An I/O channel has been set to its OFF position. For an output this means that it has been set low. For a channel set as an input it means the channel input turned low. The channel is checked every second for a change. |
| CLASS1.CONTROL (30) Type=5, TurnOn | An I/O channel has been set to its ON position. The channel is checked every second for a change. This is only valid for a channel configured as input. |
| CLASS1.CONTROL (30) Type=6, TurnOff | An I/O channel has been set to its OFF position. The channel is checked every second for a change. This is only valid for a channel configured as input. |
| CLASS1.DATA (15) Type=1, I/O Value | Input/Output data steam event sent on regular intervals if activated. Byte 0 Bit 7 - Reserved. Bit 6 - Reserved. Bit 5 - Reserved. Bit 4 - Reserved. Bit 3 - Reserved. Bit 2 - Reserved. Bit 1 - Channel 9. Bit 0 - Channel 8. Byte 1 Bit 7 - Channel 7. Bit 6 - Channel 6. Bit 5 - Channel 5. Bit 4 - Channel 4. Bit 3 - Channel 3. Bit 2 - Channel 2. Bit 1 - Channel 1. Bit 0 - Channel 0. |
| CLASS1.ALARM (1) Type=1, Alarm occurred | If an alarm is armed this event is sent when it occurs and the corresponding alarm bit is set in the alarm register. Byte 0 - Channel 0-9 Byte 1 - Zone for module. Byte 2 - Sub zone for channel or sub zone for module if channel sub zone is zero. |
email: info@paradiseofthefrog.com phone: +46 (0)8 40011835
web: http://www.paradiseofthefrog.com