Using with the VSCP Daemon

Full info about the driver is here

Add the driver to the vscpd.conf file in the <level1driver> section.

Windows

<!-- The can4vscp driver  -->
<driver enable="true" >
    <name>can4vscp</name>
    <config>com10</config>
    <path>c:\somewhere\vscpl1_can4vscpdrv.dll</path>
    <flags>0</flags>
    <guid>00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00</guid>
</driver>

Unix

<driver enable="true" >
   <name>can4vscp</name>
   <path>/home/akhe/vscp_software/src/vscp/drivers/level1/can4vscp/linux/vscpl1drv_can4vscp.so</path>
   <config>/dev/ttyUSB2</config>
   <guid>00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00</guid>
</driver>

then restart the vscp daemon to load the driver.

Explanations

driver enable

Set to true to activate the driver or false to disable it.

name

Set to anything you like. This is just an identifier for the driver.

path

The full path to the driver

config

The serial adapter the Frankfurt RS-232 module is connected to.

guid

The GUID for the driver. Will be used if not non-zero which is the default. If zero or not given the GUID of the interface of the daemon will be used.




Paradise of the Frog AB Brattbergavägen 17 820 50 LOS SWEDEN
email: info@grodansparadis.com phone: +46 (0)8 40011835
web:http://www.grodansparadis.com

 
using_with_vscp_daemon.txt · Last modified: 2015/10/06 09:44 by admin