Using with Raspberry Pi

Making sure it works

The USB serial adapter that is shipped with Frankfurt RS-232 s identified by Raspberry Pi as ch341. lsusb (sudo apt-get install usbutils) will show something like

 Bus 001 Device 004: ID 1a86:7523 QinHeng Electronics HL-340 USB-Serial adapter

If you issue lsmod you should have a line like

 usbserial              31088  1 ch341

then normally you have the serial port as /dev/ttyUSB0

and can open it using minicom (sudo apt-get install minicom) with

 sudo minicom --baudrate 115200 --device /dev/ttySUB0

You may want to change permissions for who can access the serial driver with

 sudo chmod a+rw /dev/ttyUSB0

which let all users use the serial channel.

Using with VSCP software

If using the non TTL version just see instructions Using with the VSCP Daemon and Using with VSCP Works.




Paradise of the Frog AB Brattbergavägen 17 820 50 LOS SWEDEN
email: info@grodansparadis.com phone: +46 (0)8 40011835
web:http://www.grodansparadis.com

 
using_with_raspberry_pi.txt · Last modified: 2015/10/06 09:45 by admin