Events

Here the events sent by the module is described.

Event Description
CLASS1.INFORMATION (20) Type=3, On An I/O channel has been set to its ON position. For an output this means that it has been set high. For a channel set as an input it means the channel input turned high. The channel is checked every second for a change.
CLASS1.INFORMATION (20) Type=4, Off An I/O channel has been set to its OFF position. For an output this means that it has been set low. For a channel set as an input it means the channel input turned low. The channel is checked every second for a change.
CLASS1.CONTROL (30) Type=5, TurnOn An I/O channel has been set to its ON position. The channel is checked every second for a change. This is only valid for a channel configured as input.
CLASS1.CONTROL (30) Type=6, TurnOff An I/O channel has been set to its OFF position. The channel is checked every second for a change. This is only valid for a channel configured as input.
CLASS1.DATA (15) Type=1, I/O Value Input/Output data steam event sent on regular intervals if activated.

Byte 0
Bit 7 - Reserved.
Bit 6 - Reserved.
Bit 5 - Reserved.
Bit 4 - Reserved.
Bit 3 - Reserved.
Bit 2 - Reserved.
Bit 1 - Channel 9.
Bit 0 - Channel 8.

Byte 1
Bit 7 - Channel 7.
Bit 6 - Channel 6.
Bit 5 - Channel 5.
Bit 4 - Channel 4.
Bit 3 - Channel 3.
Bit 2 - Channel 2.
Bit 1 - Channel 1.
Bit 0 - Channel 0.
CLASS1.ALARM (1) Type=1, Alarm occurred If an alarm is armed this event is sent when it occurs and the corresponding alarm bit is set in the alarm register.

Byte 0 - Channel 0-9
Byte 1 - Zone for module.
Byte 2 - Sub zone for channel or sub zone for module if channel sub zone is zero.



Paradise of the Frog AB Brattbergavägen 17, 820 50 LOS, SWEDEN
email: info@paradiseofthefrog.com phone: +46 (0)8 40011835
web: http://www.paradiseofthefrog.com

 
events.txt · Last modified: 2015/11/12 18:15 by admin