Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
registers [2015/11/21 18:13]
admin [Control registers for counters]
registers [2018/02/08 17:26] (current)
Line 24: Line 24:
  
 ^ Register ^ Page ^ Description ^ ^ Register ^ Page ^ Description ^
-|  10  |  0  | Control register for channel 0 frequency\\ \\ **Bit 0** - Enable frequency low alarm.\\ **Bit 1** - Enable frequency high alarm.\\ **Bit 2** - Reserved.\\ **Bit 3** - Reserved.\\ **Bit 4** - Enable stream events.\\ **Bit 5** - Reserved.\\ **Bit 6** - Reserved.\\ **Bit 7** - Enable frequency measurements. | +|  10  |  0  | Control register for channel 0 frequency\\ \\ **Bit 0** - Enable frequency low alarm.\\ **Bit 1** - Enable frequency high alarm.\\ **Bit 2** - Reserved.\\ **Bit 3** - Reserved.\\ **Bit 4** - Reserved.\\ **Bit 5** - Reserved.\\ **Bit 6** - Reserved.\\ **Bit 7** - Enable frequency measurements. | 
-|  11  |  0  | Control register for channel 1 frequency\\ \\ **Bit 0** - Enable frequency low alarm.\\ **Bit 1** - Enable frequency high alarm.\\ **Bit 2** - Reserved.\\ **Bit 3** - Reserved.\\ **Bit 4** - Enable stream events.\\ **Bit 5** - Reserved.\\ **Bit 6** - Reserved.\\ **Bit 7** - Enable frequency measurements. | +|  11  |  0  | Control register for channel 1 frequency\\ \\ **Bit 0** - Enable frequency low alarm.\\ **Bit 1** - Enable frequency high alarm.\\ **Bit 2** - Reserved.\\ **Bit 3** - Reserved.\\ **Bit 4** - Reserved.\\ **Bit 5** - Reserved.\\ **Bit 6** - Reserved.\\ **Bit 7** - Enable frequency measurements. | 
-|  12  |  0  | Control register for channel 2 frequency\\ \\ **Bit 0** - Enable frequency low alarm.\\ **Bit 1** - Enable frequency high alarm.\\ **Bit 2** - Reserved.\\ **Bit 3** - Reserved.\\ **Bit 4** - Enable stream events.\\ **Bit 5** - Reserved.\\ **Bit 6** - Reserved.\\ **Bit 7** - Enable frequency measurements. | +|  12  |  0  | Control register for channel 2 frequency\\ \\ **Bit 0** - Enable frequency low alarm.\\ **Bit 1** - Enable frequency high alarm.\\ **Bit 2** - Reserved.\\ **Bit 3** - Reserved.\\ **Bit 4** - Reserved.\\ **Bit 5** - Reserved.\\ **Bit 6** - Reserved.\\ **Bit 7** - Enable frequency measurements. | 
-|  13  |  0  | Control register for channel 3 frequency\\ \\ **Bit 0** - Enable frequency low alarm.\\ **Bit 1** - Enable frequency high alarm.\\ **Bit 2** - Reserved.\\ **Bit 3** - Reserved.\\ **Bit 4** - Enable stream events.\\ **Bit 5** - Reserved.\\ **Bit 6** - Reserved.\\ **Bit 7** - Enable frequency measurements. |+|  13  |  0  | Control register for channel 3 frequency\\ \\ **Bit 0** - Enable frequency low alarm.\\ **Bit 1** - Enable frequency high alarm.\\ **Bit 2** - Reserved.\\ **Bit 3** - Reserved.\\ **Bit 4** - Reserved.\\ **Bit 5** - Reserved.\\ **Bit 6** - Reserved.\\ **Bit 7** - Enable frequency measurements. |
  
 ==== Counter reset  ==== ==== Counter reset  ====
 
registers.txt · Last modified: 2018/02/08 17:26 (external edit)