Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
events [2015/11/18 13:45]
admin
events [2018/02/08 17:26] (current)
Line 5: Line 5:
  
 ^ Event ^ Description ^ ^ Event ^ Description ^
-|  [[http://​www.vscp.org/​docs/​vscpspec/​doku.php?​id=class1.data#​type_6_0x06_count_value|CLASS1.DATA (15) Type=6, Count Value]] ​ | Count data steam event sent on regular intervals if activated. Coding: Integer. Unit: none. \\ \\ **__Byte 0__**\\ [[http://​www.vscp.org/​docs/​vscpspec/​doku.php?​id=data_coding|Datacoding:​]] 0b__011__00__xxx__ where xxx is the counter (0-3/4-7)\\ \\ **0x60** - Counter 0\\ **0x61** - Counter 1\\ **0x62** - Counter 2\\ **0x63** - Counter 3\\ \\  **__Byte 1-4__**\\ Counter value MSB in first byte. \\ \\ The upper 32-bits of the 64-bit value can be ignored if not needed. But it will always be sent out on the bus. |+|  [[http://​www.vscp.org/​docs/​vscpspec/​doku.php?​id=class1.data#​type_6_0x06_count_value|CLASS1.DATA (15) Type=6, Count Value]] ​ | Count data steam event sent on regular intervals if activated. Coding: Integer. Unit: none. \\ \\ **__Byte 0__**\\ [[http://​www.vscp.org/​docs/​vscpspec/​doku.php?​id=data_coding|Datacoding:​]] 0b__011__00__xxx__ where xxx is the counter (0-3/4-7)\\ \\ **0x60** - Counter 0\\ **0x61** - Counter 1\\ **0x62** - Counter 2\\ **0x63** - Counter 3\\ \\  **__Byte 1-4__**\\ Counter value MSB in first byte.  |
 |  [[http://​www.vscp.org/​docs/​vscpspec/​doku.php?​id=class1.alarm&#​type_2_0x02_alarm_occurred|CLASS1.ALARM (1) Type=1, Alarm occurred]] ​ | If an alarm is armed this event is sent when it occurs and the corresponding alarm bit is set in the alarm register.\\ \\ **Byte 0** - Channel 0-3 for counter, channel 4-6 for frequency low, channel 7-9 for frequency high. \\ **Byte 1** - Zone for module.\\ **Byte 2** - Sub zone for channel.\\ ​ | |  [[http://​www.vscp.org/​docs/​vscpspec/​doku.php?​id=class1.alarm&#​type_2_0x02_alarm_occurred|CLASS1.ALARM (1) Type=1, Alarm occurred]] ​ | If an alarm is armed this event is sent when it occurs and the corresponding alarm bit is set in the alarm register.\\ \\ **Byte 0** - Channel 0-3 for counter, channel 4-6 for frequency low, channel 7-9 for frequency high. \\ **Byte 1** - Zone for module.\\ **Byte 2** - Sub zone for channel.\\ ​ |
 |  [[http://​www.vscp.org/​docs/​vscpspec/​doku.php?​id=class1.measurement#​type_9_0x09_frequency|CLASS1.MEASUREMENT (10) Type=9, Frequency]] ​ | Frequency measurement event sent on regular intervals if activated. ​ Coding: 32-bit integer. Unit: Hertz.\\ \\ **__Byte 0__**\\ [[http://​www.vscp.org/​docs/​vscpspec/​doku.php?​id=data_coding|Datacoding:​]] 0b__011__00__xxx__ where xxx is the counter (0-3)\\ \\ **0x60** - Counter 0\\ **0x61** - Counter 1\\ **0x62** - Counter 2\\ **0x63** - Counter 3\\ \\  **__Byte 1-4__**\\ Frequency value as 32-bit floating point value  with MSB in first byte.  | |  [[http://​www.vscp.org/​docs/​vscpspec/​doku.php?​id=class1.measurement#​type_9_0x09_frequency|CLASS1.MEASUREMENT (10) Type=9, Frequency]] ​ | Frequency measurement event sent on regular intervals if activated. ​ Coding: 32-bit integer. Unit: Hertz.\\ \\ **__Byte 0__**\\ [[http://​www.vscp.org/​docs/​vscpspec/​doku.php?​id=data_coding|Datacoding:​]] 0b__011__00__xxx__ where xxx is the counter (0-3)\\ \\ **0x60** - Counter 0\\ **0x61** - Counter 1\\ **0x62** - Counter 2\\ **0x63** - Counter 3\\ \\  **__Byte 1-4__**\\ Frequency value as 32-bit floating point value  with MSB in first byte.  |
 
events.txt ยท Last modified: 2018/02/08 17:26 (external edit)