Events

Here the events sent by the module is described.

Event Description
CLASS1.DATA (15) Type=6, Count Value Count data steam event sent on regular intervals if activated. Coding: Integer. Unit: none.

Byte 0
Datacoding: 0b01100xxx where xxx is the counter (0-3/4-7)

0x60 - Counter 0
0x61 - Counter 1
0x62 - Counter 2
0x63 - Counter 3

Byte 1-4
Counter value MSB in first byte.
CLASS1.ALARM (1) Type=1, Alarm occurred If an alarm is armed this event is sent when it occurs and the corresponding alarm bit is set in the alarm register.

Byte 0 - Channel 0-3 for counter, channel 4-6 for frequency low, channel 7-9 for frequency high.
Byte 1 - Zone for module.
Byte 2 - Sub zone for channel.
CLASS1.MEASUREMENT (10) Type=9, Frequency Frequency measurement event sent on regular intervals if activated. Coding: 32-bit integer. Unit: Hertz.

Byte 0
Datacoding: 0b01100xxx where xxx is the counter (0-3)

0x60 - Counter 0
0x61 - Counter 1
0x62 - Counter 2
0x63 - Counter 3

Byte 1-4
Frequency value as 32-bit floating point value with MSB in first byte.
CLASS1.MEASUREMENT (10) Type=x Measurement values of all kinds can be sent as a result of linearization. For example can an input counting S0 pulses be translated to KWh and watt

The data is always a 32-bit floating point value and the and the counter is in the sensor index bits of the data coding byte. Unit and measurement type is configurable.




Paradise of the Frog AB Brattbergavägen 17 820 50 LOS SWEDEN
email: info@grodansparadis.com phone: +46 (0)8 40011835
web:http://www.grodansparadis.com

 
events.txt · Last modified: 2015/11/26 21:38 by admin