Register | Page | Description |
---|---|---|
0 | 0 | The zone this module belongs to |
1 | 0 | The sub zone this module belongs to |
2 | 0 | Sub zone for channel 0 |
3 | 0 | Sub zone for channel 1 |
4 | 0 | Sub zone for channel 2 |
5 | 0 | Sub zone for channel 3 |
Register | Page | Description |
---|---|---|
6 | 0 | Control register for channel 0 counter Bit 0 - Counting direction (0=up/1=down). Bit 1 - Enable alarm level. Bit 2 - Reload value on zero. Bit 3 - Reserved. Bit 4 - Reserved. Bit 5 - Reserved. Bit 6 - Reserved. Bit 7 - Enable counter. |
7 | 0 | Control register for channel 1 counter Bit 0 - Counting direction (0=up/1=down). Bit 1 - Enable alarm level. Bit 2 - Reload value on zero. Bit 3 - Reserved. Bit 4 - Reserved. Bit 5 - Reserved. Bit 6 - Reserved. Bit 7 - Enable counter. |
8 | 0 | Control register for channel 2 counter Bit 0 - Counting direction (0=up/1=down). Bit 1 - Enable alarm level. Bit 2 - Reload value on zero. Bit 3 - Reserved. Bit 4 - Reserved. Bit 5 - Reserved. Bit 6 - Reserved. Bit 7 - Enable counter. |
9 | 0 | Control register for channel 3 counter Bit 0 - Counting direction (0=up/1=down). Bit 1 - Enable alarm level. Bit 2 - Reload value on zero. Bit 3 - Reserved. Bit 4 - Reserved. Bit 5 - Reserved. Bit 6 - Reserved. Bit 7 - Enable counter. |
Register | Page | Description |
---|---|---|
10 | 0 | Control register for channel 0 frequency Bit 0 - Enable frequency low alarm. Bit 1 - Enable frequency high alarm. Bit 2 - Reserved. Bit 3 - Reserved. Bit 4 - Reserved. Bit 5 - Reserved. Bit 6 - Reserved. Bit 7 - Enable frequency measurements. |
11 | 0 | Control register for channel 1 frequency Bit 0 - Enable frequency low alarm. Bit 1 - Enable frequency high alarm. Bit 2 - Reserved. Bit 3 - Reserved. Bit 4 - Reserved. Bit 5 - Reserved. Bit 6 - Reserved. Bit 7 - Enable frequency measurements. |
12 | 0 | Control register for channel 2 frequency Bit 0 - Enable frequency low alarm. Bit 1 - Enable frequency high alarm. Bit 2 - Reserved. Bit 3 - Reserved. Bit 4 - Reserved. Bit 5 - Reserved. Bit 6 - Reserved. Bit 7 - Enable frequency measurements. |
13 | 0 | Control register for channel 3 frequency Bit 0 - Enable frequency low alarm. Bit 1 - Enable frequency high alarm. Bit 2 - Reserved. Bit 3 - Reserved. Bit 4 - Reserved. Bit 5 - Reserved. Bit 6 - Reserved. Bit 7 - Enable frequency measurements. |
Register | Page | Description |
---|---|---|
14 | 0 | Reset channel 0 counter Reset counter 0 by writing 0x55 to this register. Will read back as zero for all values except 0x55. |
15 | 0 | Reset channel 1 counter Reset counter 1 by writing 0x55 to this register. Will read back as zero for all values except 0x55. |
16 | 0 | Reset channel 2 counter Reset counter 2 by writing 0x55 to this register. Will read back as zero for all values except 0x55. |
17 | 0 | Reset channel 3 counter Reset counter 3 by writing 0x55 to this register. Will read back as zero for all values except 0x55. |
Register | Page | Description |
---|---|---|
18 | 0 | 32-bit counter 0 (MSB) |
19 | 0 | 32-bit counter 0 |
20 | 0 | 32-bit counter 0 |
21 | 0 | 32-bit counter 0 (LSB) |
22 | 0 | 32-bit counter 1 (MSB) |
23 | 0 | 32-bit counter 1 |
24 | 0 | 32-bit counter 1 |
25 | 0 | 32-bit counter 1 (LSB) |
26 | 0 | 32-bit counter 2 (MSB) |
27 | 0 | 32-bit counter 2 |
28 | 0 | 32-bit counter 2 |
29 | 0 | 32-bit counter 2 (LSB) |
30 | 0 | 32-bit counter 3 (MSB) |
31 | 0 | 32-bit counter 3 |
32 | 0 | 32-bit counter 3 |
33 | 0 | 32-bit counter 3 (LSB) |
Register | Page | Description |
---|---|---|
34 | 0 | 32-bit counter 0 alarm level (MSB) |
35 | 0 | 32-bit counter 0 alarm level |
36 | 0 | 32-bit counter 0 alarm level |
37 | 0 | 32-bit counter 0 alarm level (LSB) |
38 | 0 | 32-bit counter 1 alarm level (MSB) |
39 | 0 | 32-bit counter 1 alarm level |
40 | 0 | 32-bit counter 1 alarm level |
41 | 0 | 32-bit counter 1 alarm level (LSB) |
42 | 0 | 32-bit counter 2 alarm level (MSB) |
43 | 0 | 32-bit counter 2 alarm level |
44 | 0 | 32-bit counter 2 alarm level |
45 | 0 | 32-bit counter 2 alarm level (LSB) |
46 | 0 | 32-bit counter 3 alarm level (MSB) |
47 | 0 | 32-bit counter 3 alarm level |
48 | 0 | 32-bit counter 3 alarm level |
49 | 0 | 32-bit counter 3 alarm level (LSB) |
Register | Page | Description |
---|---|---|
50 | 0 | 32-bit counter 0 reload value (MSB) |
51 | 0 | 32-bit counter 0 reload value |
52 | 0 | 32-bit counter 0 reload value |
53 | 0 | 32-bit counter 0 reload value (LSB) |
54 | 0 | 32-bit counter 1 reload value (MSB) |
55 | 0 | 32-bit counter 1 reload value |
56 | 0 | 32-bit counter 1 reload value |
57 | 0 | 32-bit counter 1 reload value (LSB) |
58 | 0 | 32-bit counter 2 reload value (MSB) |
59 | 0 | 32-bit counter 2 reload value |
60 | 0 | 32-bit counter 2 reload value |
61 | 0 | 32-bit counter 2 reload value (LSB) |
62 | 0 | 32-bit counter 3 reload value (MSB) |
63 | 0 | 32-bit counter 3 reload value |
64 | 0 | 32-bit counter 3 reload value |
65 | 0 | 32-bit counter 3 reload value (LSB) |
Register | Page | Description |
---|---|---|
66 | 0 | 16-bit counter 0 hysteresis (MSB) |
67 | 0 | 16-bit counter 0 hysteresis (LSB) |
68 | 0 | 16-bit counter 1 hysteresis (MSB) |
69 | 0 | 16-bit counter 1 hysteresis (LSB) |
70 | 0 | 16-bit counter 2 hysteresis (MSB) |
71 | 0 | 16-bit counter 2 hysteresis (LSB) |
72 | 0 | 16-bit counter 3 hysteresis (MSB) |
73 | 0 | 16-bit counter 3 hysteresis (LSB) |
Register | Page | Description |
---|---|---|
74 | 0 | Report interval for counter 0 in seconds. Set to zero to disable. |
75 | 0 | Report interval for counter 1 in seconds. Set to zero to disable. |
76 | 0 | Report interval for counter 2 in seconds. Set to zero to disable. |
77 | 0 | Report interval for counter 3 in seconds. Set to zero to disable. |
78 | 0 | Report interval for frequency 0 in seconds. Set to zero to disable. |
Register | Page | Description |
---|---|---|
79 | 0 | Report interval for frequency 1 in seconds. Set to zero to disable. |
80 | 0 | Report interval for frequency 2 in seconds. Set to zero to disable. |
81 | 0 | Report interval for frequency 3 in seconds. Set to zero to disable. |
Register | Page | Description |
---|---|---|
82 | 0 | Report interval for measurement 0 in seconds. Set to zero to disable. |
83 | 0 | Report interval for measurement 1 in seconds. Set to zero to disable. |
84 | 0 | Report interval for measurement 2 in seconds. Set to zero to disable. |
85 | 0 | Report interval for measurement 3 in seconds. Set to zero to disable. |
Register | Page | Description |
---|---|---|
86 | 0 | VSCP event information for linearization counter 0 bit 0 - Calculate using counter if zero, frequency if one. bit 1 - Reserved. bit 2 - Reserved. bit 3 - Unit. bit 4 - Unit. bit 5 - Reserved. bit 6 - Class bit 8. bit 7 - Enable. |
87 | 0 | VSCP event information for linearization counter 0, VSCP Class low eight bits |
88 | 0 | VSCP event information for linearization counter 0, VSCP Type |
89 | 0 | VSCP event information for linearization counter 1 bit 0 - Calculate using counter if zero, frequency if one. bit 1 - Reserved. bit 2 - Reserved. bit 3 - Unit. bit 4 - Unit. bit 5 - Reserved. bit 6 - Class bit 8. bit 7 - Enable. |
90 | 0 | VSCP event information for linearization counter 1, VSCP Class low eight bits |
91 | 0 | VSCP event information for linearization counter 1, VSCP Type |
92 | 0 | VSCP event information for linearization counter 2 bit 0 - Calculate using counter if zero, frequency if one. bit 1 - Reserved. bit 2 - Reserved. bit 3 - Unit. bit 4 - Unit. bit 5 - Reserved. bit 6 - Reserved. bit 7 - Class bit 8. |
93 | 0 | VSCP event information for linearization counter 2, VSCP Class low eight bits |
94 | 0 | VSCP event information for linearization counter 2, VSCP Type |
95 | 0 | VSCP event information for linearization counter 3 bit 0 - Calculate using counter if zero, frequency if one. bit 1 - Reserved. bit 2 - Reserved. bit 3 - Unit. bit 4 - Unit. bit 5 - Class bit 8. bit 6 - Enable. bit 7 - Enable. |
96 | 0 | VSCP event information for linearization counter 3, VSCP Class low eight bits |
97 | 0 | VSCP event information for linearization counter 3, VSCP Type |
Register | Page | Description |
---|---|---|
0 | 1 | 32-bit frequency for channel 0 (MSB) |
1 | 1 | 32-bit frequency for channel 0 |
2 | 1 | 32-bit frequency for channel 0 |
3 | 1 | 32-bit frequency for channel 0 (LSB) |
4 | 1 | 32-bit frequency for channel 1 (MSB) |
5 | 1 | 32-bit frequency for channel 1 |
6 | 1 | 32-bit frequency for channel 1 |
7 | 1 | 32-bit frequency for channel 1 (LSB) |
8 | 1 | 32-bit frequency for channel 2 (MSB) |
9 | 1 | 32-bit frequency for channel 2 |
10 | 1 | 32-bit frequency for channel 2 |
11 | 1 | 32-bit frequency for channel 2 (LSB) |
12 | 1 | 32-bit frequency for channel 3 (MSB) |
13 | 1 | 32-bit frequency for channel 3 |
14 | 1 | 32-bit frequency for channel 3 |
15 | 1 | 32-bit frequency for channel 3 (LSB) |
Register | Page | Description |
---|---|---|
16 | 1 | 32-bit frequency low alarm level for channel 0 (MSB) |
17 | 1 | 32-bit frequency low alarm level for channel 0 |
18 | 1 | 32-bit frequency low alarm level for channel 0 |
19 | 1 | 32-bit frequency low alarm level for channel 0 (LSB) |
20 | 1 | 32-bit frequency low alarm level for channel 1 (MSB) |
21 | 1 | 32-bit frequency low alarm level for channel 1 |
22 | 1 | 32-bit frequency low alarm level for channel 1 |
23 | 1 | 32-bit frequency low alarm level for channel 1 (LSB) |
24 | 1 | 32-bit frequency low alarm level for channel 2 (MSB) |
25 | 1 | 32-bit frequency low alarm level for channel 2 |
26 | 1 | 32-bit frequency low alarm level for channel 2 |
27 | 1 | 32-bit frequency low alarm level for channel 2 (LSB) |
28 | 1 | 32-bit frequency low alarm level for channel 3 (MSB) |
29 | 1 | 32-bit frequency low alarm level for channel 3 |
30 | 1 | 32-bit frequency low alarm level for channel 3 |
31 | 1 | 32-bit frequency low alarm level for channel 3 (LSB) |
Register | Page | Description |
---|---|---|
32 | 1 | 32-bit frequency high alarm level for channel 0 (MSB) |
33 | 1 | 32-bit frequency high alarm level for channel 0 |
34 | 1 | 32-bit frequency high alarm level for channel 0 |
35 | 1 | 32-bit frequency high alarm level for channel 0 (LSB) |
36 | 1 | 32-bit frequency high alarm level for channel 1 (MSB) |
37 | 1 | 32-bit frequency high alarm level for channel 1 |
38 | 1 | 32-bit frequency high alarm level for channel 1 |
39 | 1 | 32-bit frequency high alarm level for channel 1 (LSB) |
40 | 1 | 32-bit frequency high alarm level for channel 2 (MSB) |
41 | 1 | 32-bit frequency high alarm level for channel 2 |
42 | 1 | 32-bit frequency high alarm level for channel 2 |
43 | 1 | 32-bit frequency high alarm level for channel 2 (LSB) |
44 | 1 | 32-bit frequency high alarm level for channel 3 (MSB) |
45 | 1 | 32-bit frequency high alarm level for channel 3 |
46 | 1 | 32-bit frequency high alarm level for channel 3 |
47 | 1 | 32-bit frequency high alarm level for channel 3 (LSB) |
Register | Page | Description |
---|---|---|
48 | 1 | 16-bit frequency 0 hysteresis (MSB) |
49 | 1 | 16-bit frequency 0 hysteresis (LSB) |
50 | 1 | 16-bit frequency 1 hysteresis (MSB) |
51 | 1 | 16-bit frequency 1 hysteresis (LSB) |
52 | 1 | 16-bit frequency 2 hysteresis (MSB) |
53 | 1 | 16-bit frequency 2 hysteresis (LSB) |
54 | 1 | 16-bit frequency 3 hysteresis (MSB) |
55 | 1 | 16-bit frequency 3 hysteresis (LSB) |
Register | Page | Description |
---|---|---|
0 | 2 | 32-bit floating point linearization k-constant for channel 0 (MSB) |
1 | 2 | 32-bit floating point linearization k-constant for channel 0 |
2 | 2 | 32-bit floating point linearization k-constant for channel 0 |
3 | 2 | 32-bit floating point linearization k-constant for channel 0 (LSB) |
4 | 2 | 32-bit floating point linearization k-constant for channel 1 (MSB) |
5 | 2 | 32-bit floating point linearization k-constant for channel 1 |
6 | 2 | 32-bit floating point linearization k-constant for channel 1 |
7 | 2 | 32-bit floating point linearization k-constant for channel 1 (LSB) |
8 | 2 | 32-bit floating point linearization k-constant for channel 2 (MSB) |
9 | 2 | 32-bit floating point linearization k-constant for channel 2 |
10 | 2 | 32-bit floating point linearization k-constant for channel 2 |
11 | 2 | 32-bit floating point linearization k-constant for channel 2 (LSB) |
12 | 2 | 32-bit floating point linearization k-constant for channel 3 (MSB) |
13 | 2 | 32-bit floating point linearization k-constant for channel 3 |
14 | 2 | 32-bit floating point linearization k-constant for channel 3 |
15 | 2 | 32-bit floating point linearization k-constant for channel 3 (LSB) |
16 | 2 | 32-bit floating point linearization m-constant for channel 0 (MSB) |
17 | 2 | 32-bit floating point linearization m-constant for channel 0 |
18 | 2 | 32-bit floating point linearization m-constant for channel 0 |
19 | 2 | 32-bit floating point linearization m-constant for channel 0 (LSB) |
20 | 2 | 32-bit floating point linearization m-constant for channel 1 (MSB) |
21 | 2 | 32-bit floating point linearization m-constant for channel 1 |
22 | 2 | 32-bit floating point linearization m-constant for channel 1 |
23 | 2 | 32-bit floating point linearization m-constant for channel 1 (LSB) |
24 | 2 | 32-bit floating point linearization m-constant for channel 2 (MSB) |
25 | 2 | 32-bit floating point linearization m-constant for channel 2 |
26 | 2 | 32-bit floating point linearization m-constant for channel 2 |
27 | 2 | 32-bit floating point linearization m-constant for channel 2 (LSB) |
28 | 2 | 32-bit floating point linearization m-constant for channel 3 (MSB) |
29 | 2 | 32-bit floating point linearization m-constant for channel 3 |
30 | 2 | 32-bit floating point linearization m-constant for channel 3 |
31 | 2 | 32-bit floating point linearization m-constant for channel 3 (LSB) |
Register | Page | Description |
---|---|---|
0-31 | 3 | Decision matrix |